1/2hp Rocking Piston Pond Aerator KIT w/100' WTD Hose + 72" Diffuser 1/2+ Acre

Description

This Pond aeration kit is perfect for any size pond - small/medium/large from 1/8 up to 1 to 2+ acres and up to 20+ feet deep!
Air diffusion aeration systems will circulate thousands of gallons of water and add oxygen from the bottom of your pond to the top!
Listing includes one NEW Rocking Piston compressor, 1-100' section of weighted self sinking aeration hose
,
SPECIAL US Solar Mounts 72"
Diffuser with Weighted Base,
ready to assemble out of the box and begin aeration of your pond or lake immediately:
**********One*****  Aeration Pump - single piston 115v, 3+ CFM 70+ PSI with a 2 year warranty.
Compressor comes ready to be hard wired into a junction box, attach a plug,  or spliced onto a power cord. Easily accomplished with common household tools.
DIFFUSER FEATURES:
72" of
High-Efficiency
Fine-Bubble Aeration Tubing
Solid, Laser-Cut Stainless Steel Base.
Unaffected by salt-water, Brackish Water or Frac Water
Lifts
1250 GPM
@ 5CFM Input
Ultra High-Flow Design
Works well in any depth profile >4'
Virtually No Added Backpressure
Check Valve Included
Completely
American-Made
Self-Sinking
Stainless Steel Uprights & Hardware
Will never rust or corrode
Unique Design
Stays upright at the bottom of your pond
Built-In Handle for
Easy Deployment
Included Hose Strain Relief for 3/8" or 1/2" Hose
Easy to Clean and Very Low Maintenance
Effective up to 100'
2-3mm Bubbles for Increased Diffusion Rates
Machined and crafted of Stainless Steel, EPDM and HDPE Plastic.
Massive 22" x 22" x 7" and weighs in at an impressive 13lbs, the DB-72 is designed to move a lot of water.
These units ship dissassembled and can be ready for your pond in about 5 minutes.
NO Membrane- NO Backpressure!
The High-Efficiency Pond Aeration Diffusers from U.S. Solar Mounts are a step above the rest, utilizing
Extruded EPDM Fine-Bubble
tubing instead of industry-standard rubber membranes.
If moving and oxygenating extremely large volumes of water is what you need, this is THE diffuser for the job.  Perfect for large water bodies and Frac Water Normalization Tanks.
Each diffuser is ruggedly constructed using high-quality,
American-Made
components. The DB72 is constructed of High-Density, PE Plastic and stainless steel. Assembly takes only about
5 Minutes
making installation quick & easy. Features like stainless steel band clips, dual-size hose strain relief, and a massive water flow rating set the DB72 apart from the competition.
Compatible with 3/8" or 1/2" ID Hose.
Ships with a 3/8" Hose Barb installed - Simply change the barb fitting for 1/2" ID Hose.
The DB-72 Diffuser comes with a
LIFETIME WARRANTY
!
Pictures are for representation only - actual items may vary in shape, style, size, color, etc.
Assembly is required - you will have to attach the filter to the intake side of the pump, the valve to exhaust side, self sink tube will have to be cut to your desired lengths and attached to the manifold, ring diffusers will have to be attached to the end of the sink tube.
These items will ship separately - there will be multiple boxes.
The compressor will need to be mounted away from any source of water - these are not submersible which keeps any contaminants out of your lake or pond.  They are completely oiless.
WE also have brand new locking cabinets available in our store!!